« previous next »
Pages: 1 [2]

Author Topic: Spring Exchange  (Read 2510 times)

Offline dyingwish

  • Modified
  • *****
  • Posts: 877
Re: Spring Exchange
« Reply #20 on: March 05, 2012, 01:37:17 PM »
I caved in and bought the springs new.  Who knew that Hyperco can be had for less than Eibach nowawdays..... :-\

Also 450's and 550's are sold!
Logged
Underfunded/Underpowered Racing

Offline Handy Man

  • Modified
  • *****
  • Posts: 728
  • Addict
Re: Spring Exchange
« Reply #21 on: March 13, 2012, 10:47:47 AM »
This is probably a long shot, but does anyone have a couple 70mm (2.75") ID, 150mm (6") long 9kg/mm (500lb/in) springs?
Logged
'11 Nissan 370Z | #13 CST - Gone but not forgotten
'94 Turbo Miata  | #131 SSM

"Losing builds character."  "F#@% that. I've got plenty of character." -Mark

Offline stealthx32

  • Owner/Admin
  • Modified
  • *****
  • Posts: 2353
    • http://www.ziptied.com
Re: Spring Exchange
« Reply #22 on: March 13, 2012, 11:03:42 AM »
Oh, I didn't know we had a local one of these.

I have a set of 14kg/mm (783 lb/in) 2.5" ID springs, I have to measure the length.

Probably looking to get under 600 lb/in, but I gotta call Bilstein first and have a chat.
Logged
'93 RX-7

Offline dyingwish

  • Modified
  • *****
  • Posts: 877
Re: Spring Exchange
« Reply #23 on: November 13, 2012, 09:35:44 AM »
Anyone happen to have a 2.5"ID x 7" x 700lb set of springs laying around?  Possible trade for brand new 650lb/in Eibachs.....I need just a bit more springs, might even consider 750lb.    :-\
Logged
Underfunded/Underpowered Racing

Offline marka

  • Modified
  • *****
  • Posts: 8597
Re: Spring Exchange
« Reply #24 on: November 13, 2012, 02:35:02 PM »
Howdy,

Quote from: dyingwish on November 13, 2012, 09:35:44 AM
Anyone happen to have a 2.5"ID x 7" x 700lb set of springs laying around?  Possible trade for brand new 650lb/in Eibachs.....I need just a bit more springs, might even consider 750lb.    :-\

I have 700 in-lb 2.5x6... That work for you?

Mark
Logged

Offline dyingwish

  • Modified
  • *****
  • Posts: 877
Re: Spring Exchange
« Reply #25 on: November 14, 2012, 06:47:17 AM »
Let me double check how many turns I have left on the sleeves, but my first inclination is that 6" will work.  I'll get back to you this afternoon mark.
Logged
Underfunded/Underpowered Racing

Offline cjb11its

  • Modified
  • *****
  • Posts: 950
Re: Spring Exchange
« Reply #26 on: November 14, 2012, 07:17:39 PM »
Mark was just afraid of those 700 pounders on the back of the neon. Think it was a tad much at beaver but at nelson that is the rate
Logged
Chris
Ft. Mill, SC
'87 Mazda RX-7 SCCA ITS Race Car
'11 Chevy Silverado Crew Cab DD/Tow Ride

Offline john

  • Modified
  • *****
  • Posts: 637
Re: Spring Exchange
« Reply #27 on: December 11, 2012, 03:51:55 PM »
hey all, I haven't been around lately ... but I picked up a new toy and now an old itch is coming back and it's getting harder and harder to ignore.  I'm trying to clean out the house a bit here before I start to think about anything new ...  :-X

I have:

Eibach ERS
2x 0800.250.0400
2x 0700.250.0500 

These are left over from my 96 civic but can probably fit other cars of course. 400 front 500 rear, stiff but not really so bad, _great autox setup on that car that was still kind of daily driveable. 

I also have the Eibach pro kit lowering springs from my 05 impreza RS.  These will fit any imprezas from 02-07 I believe.  Gave it a nice drop with not really any noticeable change in ride quality...

Both sets have just been sitting here for years, so these would be free to a good home. 

I also have a set of General Altimax Arctic snow tires 205/55/16 .. not really sure how much tread is left, I can look, but I figure there's got to be enough for another winter.
Logged
'13 WRX
'05 RS SOLD (flooded :( )
'96 Civic SOLD

Offline mike l

  • Stock
  • *
  • Posts: 30
Re: Spring Exchange
« Reply #28 on: December 12, 2012, 09:44:33 AM »
i am definately interested in the eibach ERS.
Logged
1991 CRX Si - with an empty engine bay.
b18b on the floor.
b20vtec on the engine stand . . .

Offline bluegolf

  • Street Prepared
  • ***
  • Posts: 172
Re: Spring Exchange
« Reply #29 on: December 13, 2012, 12:59:57 PM »
I am looking for two 250# x 2.5" diameter x 7" long if anyone has any.  I have two 550# x 2.5 x 6" and two 375# x 2.5 x 6" if anyone is interested.  I may have two 600# x 2.5 x 7" available as well.
Logged
85 VW Golf  85 VW GTI 16v  02 Porsche 911

Offline stevers

  • Modified
  • *****
  • Posts: 758
Re: Spring Exchange
« Reply #30 on: February 09, 2013, 06:08:38 PM »
2 brand new Hypercoil Springs
8 in x 2.5 ID x 500 lb's

$120

If you want them within the next week and half, I can get them to Pittsburgh at not cost and you just need to pick them up.
Logged
08 335i
Pages: 1 [2]
« previous next »